x

Acknowledgment:
My artwork is print-ready, and I understand that it will be printed exactly as submitted. I acknowledge that the file is free of transparent pixels and any remnants from background removal. If the file is not sent in CMYK mode, some color shades may differ. I certify that my file is in CMYK mode.

1 1

NeoInk Transfers

Glow in the Dark DTF Transfers

Glow in the Dark DTF Transfers

$0.02 CAD
$0.02 CAD
Sale Sold out
Shipping calculated at checkout.
Color: Pink

Our Glow in the Dark DTF Transfers are good!

Pair with our Blank Apparel to get up to 30% OFF your next DTF Transfers

Adults' T-Shirts
Long Sleeve T-shirts
Sweatpants
Hats
Tote Bags
View full details

3D Puff Transfers, Explained

Everything you need to apply, care for, and design around your puff transfers — from heat settings to artwork setup.

Press Settings

Temperature Time Pressure Peel Fabrics
150°C – 175°C
(300°F – 350°F)		 7 seconds Heavy Hot peel
peel right away		 Cotton, Cotton/Poly, Canvas, Tri-blends

Settings vary by material — always run a test press first.

Washing & Care

Washing Cold water, inside out
Drying Air dry or tumble dry on low
Bleaching Not recommended
Ironing Inside out only
Storage Cool, dry place out of direct sunlight
Shelf Life Up to 2 years from production date

A standard household detergent is all you need.

Designing Your Artwork

A few quick rules so your puff print pops the way it should.

Single-color artwork example for 3D puff transfers

Keep colors simple

Single-color designs give the cleanest, most consistent puff. Skip intricate multi-color artwork.

Bold text width example for 3D puff transfers

Go bold, not thin

Thick, chunky letterforms hold the dimensional puff effect best. Fine scripts and small text tend to flatten out.

Line thickness and negative space example for 3D puff transfers

Give it room to breathe

Aim for at least 2pt line thickness and 4pt of negative space between elements (1pt = 1/72 inch).

How to Apply

Three steps from press to peel.

1. Place

Lay your transfer face down in position. Use heat-tape for hats or tricky placements.

2. Press

Apply heavy, even pressure at 175°C / 350°F for 7 seconds.

3. Peel

This is a hot peel — remove the backing sheet immediately while warm.

Features
Wide fabric compatibility: Vivid, true-to-color results on 100% cotton, cotton/poly blends, canvas, and tri-blends.
Pro-level finish: 100% screen-printed transfers built for bold, dimensional, retail-quality designs at home.
Design review included: Our team checks every order for print-readiness and can help clean up files based on your notes.
Satisfaction guaranteed: Not happy with the result? We'll reprint your order at no extra charge.
Pressing Instructions
Position face down: Line up the transfer carefully on your item. Heat-resistant tape isn't usually needed on a flat press, but it helps a lot for hats or ironing.
Press: Heavy pressure at 175°C / 350°F for 7 seconds.
Peel: This is a hot peel — remove the film right away.
Care Instructions
Turn the garment inside out before washing.
Wash in cold water.
Air dry, or tumble dry on low.
These steps help your print last as long as possible.
Art Upload Tips
All file types accepted — vector files give the best results, and raster art should be at least 300 DPI. Adobe RGB (1998) is preferred for color accuracy.
Minimum detail size: elements smaller than 0.02in (0.5mm) may not transfer cleanly.
Tip: exporting from Canva or Procreate as a PDF works great.

Design Library

1 18