x

⚠️ Important Notice:
Same-day pickup and shipping apply only to 3D Puff Transfers up to 200 inches in length. Larger orders may require additional processing time. If you add Weeding Service, please allow an extra 24 hours for processing.

Acknowledgment:
I confirm that my artwork is print-ready and will be produced exactly as submitted. For the best 3D puff effect, I understand that designs should be one solid color, as multi-color artwork may not produce optimal results. I certify that my file is free of transparent pixels and leftover background artifacts, and is in CMYK color mode. I understand that colors may vary if my file is submitted in RGB, and that very fine details or small text may not puff properly.

1 4

NeoInk Transfers

Metallic Heat Transfers

Metallic Heat Transfers

Special Vinyl Effect That Ink Cannot Match!
OEKO-TEX Certified

OEKO-TEX® Certified

? OEKO-TEX® certified for safe, non-toxic prints on every order.
Per sq in:
Quantity Price Each Per Sq In Discount
1-9 —
10-24 20% off
25-49 40% off
50+ 60% off
Weeding Service

We remove the unwanted cut pieces so your transfer is ready to use. Please allow an extra 24 hours.

⚠️ Important Notice:
Same-day pickup and shipping apply only to 3D Puff Transfers up to 200 inches in length. Larger orders may require additional processing time. If you add Weeding Service, please allow an extra 24 hours for processing.

Acknowledgment:
I confirm that my artwork is print-ready and will be produced exactly as submitted. For the best 3D puff effect, I understand that designs should be one solid color, as multi-color artwork may not produce optimal results. I certify that my file is free of transparent pixels and leftover background artifacts, and is in CMYK color mode. I understand that colors may vary if my file is submitted in RGB, and that very fine details or small text may not puff properly.

Metallic heat transfer vinyl with a high-gloss, mirror-like finish that catches the light from every angle. It has an excellent durability, giving every custom tee or hoodie you sell a premium metallic shine.

Pair with our Blank Apparel to get up to 30% OFF your next DTF Transfers

Adults' T-Shirts
Long Sleeve T-shirts
Sweatpants
Hats
Tote Bags
View full details

Metallic Transfers, Explained

Everything you need to apply and care for your Metallic heat transfer vinyl, from its mirror-like finish to the correct heat settings.

Press Settings

Temperature160–170°C
320–338°F
Time8–10 seconds
PressureMedium
PeelWarm
Fabrics100% Cotton, 100% Polyester, Poly/cotton blends, Acrylic and similar fabrics

We highly recommend performing a test press before standard production. Not suitable for nylon or coated fabrics.

Washing & Care

First Wash
Wait at least 24 hours after pressing
Washing
Standard cycle at 40°C
Drying
Tumble dry on a low setting
Bleaching
Not allowed
Ironing
Inside-out only
Storage
Below 25°C, 40% humidity, away from direct sunlight
Shelf Life
1 year

Recommend using household standard washing detergent.

How to Apply

Six steps to a perfect Metallic print.

  1. Weeding silver metallic heat transfer vinyl

    1. Weeding

    Carefully remove any excess film from around your design.

  2. Placing a silver metallic vinyl transfer on a black t-shirt

    2. Place

    Lay your transfer face down in position. Use heat-tape for hats or tricky placements.

  3. Heat pressing a silver metallic vinyl transfer

    3. Press

    Apply medium, even pressure at 160–170°C for 8–10 seconds.

  4. Cooling down a pressed silver metallic vinyl transfer

    4. Cooling Down

    Let it cool for a few seconds until it is warm, not hot.

  5. Warm peeling the liner from a silver metallic vinyl transfer

    5. Peel

    Peel the release liner while it is still warm.

  6. Finished silver metallic heat transfer vinyl on a black t-shirt

    6. Done

    Your Metallic transfer is finished and ready to wear. Wait 24 hours before the first wash.

Mirror finish: A high-gloss, mirror-like metallic effect.
Durability: Excellent durability.
Easy to weed: Excess film comes away easily from your design.
Versatile application: Great for fashion, party and leisure wear.
Material specs: Polyester film with an adhesive carrier.
Fabric compatibility: 100% cotton, 100% polyester, poly/cotton blends, acrylic and similar fabrics. Not suitable for nylon or coated fabrics.

Press: Medium, even pressure at 160–170°C (320–338°F) for 8–10 seconds.
Peel: WARM PEEL. Remove the release liner while it is still warm.
Test first: We highly recommend performing a test before proceeding with standard production.
Curing: Allow at least 24 hours after pressing before the first wash.

Standard machine wash at 40°C.
Tumble dry on a low setting.
Iron inside-out only.
Do not bleach. Use household standard washing detergent.

Thickness: 100μm (± 5μm).
Storage: Below 25°C (± 3°C) at 40% relative humidity (± 20%), out of direct sunlight.
Shelf Life: 1 year.

Design Library

1 18