x

⚠️ Important Notice:
Same-day pickup and shipping apply only to 3D Puff Transfers up to 200 inches in length. Larger orders may require additional processing time. If you add Weeding Service, please allow an extra 24 hours for processing.

Acknowledgment:
I confirm that my artwork is print-ready and will be produced exactly as submitted. For the best 3D puff effect, I understand that designs should be one solid color, as multi-color artwork may not produce optimal results. I certify that my file is free of transparent pixels and leftover background artifacts, and is in CMYK color mode. I understand that colors may vary if my file is submitted in RGB, and that very fine details or small text may not puff properly.

1 4

NeoInk Transfers

Subli-Block Heat Transfers

Subli-Block Heat Transfers

Special Vinyl Effect That Ink Cannot Match!
OEKO-TEX Certified

OEKO-TEX® Certified

? OEKO-TEX® certified for safe, non-toxic prints on every order.
Per sq in:
Quantity Price Each Per Sq In Discount
1-9 —
10-24 20% off
25-49 40% off
50+ 60% off
Weeding Service

We remove the unwanted cut pieces so your transfer is ready to use. Please allow an extra 24 hours.

⚠️ Important Notice:
Same-day pickup and shipping apply only to 3D Puff Transfers up to 200 inches in length. Larger orders may require additional processing time. If you add Weeding Service, please allow an extra 24 hours for processing.

Acknowledgment:
I confirm that my artwork is print-ready and will be produced exactly as submitted. For the best 3D puff effect, I understand that designs should be one solid color, as multi-color artwork may not produce optimal results. I certify that my file is free of transparent pixels and leftover background artifacts, and is in CMYK color mode. I understand that colors may vary if my file is submitted in RGB, and that very fine details or small text may not puff properly.

Subli-Block heat transfers have a built-in dye-block barrier that keeps white names, numbers and sponsor logos solid and crisp on sublimated jerseys.

Pair with our Blank Apparel to get up to 30% OFF your next DTF Transfers

Adults' T-Shirts
Long Sleeve T-shirts
Sweatpants
Hats
Tote Bags
View full details

Subli Block Transfers, Explained

Everything you need to apply and care for your Subli Block heat transfer vinyl, from its dye-blocking barrier to the correct heat settings.

Press Settings

Temperature150°C
302°F
Time10 seconds
PressureMedium
PeelWarm
Fabrics100% Cotton, 100% Polyester, Poly/cotton blends, Acrylic and similar fabrics

We highly recommend performing a test press before standard production. Not suitable for nylon or coated fabrics.

Washing & Care

First Wash
Wait at least 24 hours after pressing
Washing
Standard cycle at 60°C
Drying
Tumble dry on a low setting
Bleaching
Not allowed
Ironing
Inside-out only
Storage
Below 25°C, 40% humidity, away from direct sunlight
Shelf Life
1 year

Recommend using household standard washing detergent.

How to Apply

Six steps to a perfect Subli Block print.

  1. Weeding white Subli Block heat transfer vinyl number 23

    1. Weeding

    Carefully remove any excess film from around your design.

  2. Placing a white Subli Block number transfer on a red sublimated jersey

    2. Place

    Lay your transfer face down in position. Use heat-tape for hats or tricky placements.

  3. Heat pressing a white Subli Block transfer on a sublimated jersey

    3. Press

    Apply medium, even pressure at 150°C for 10 seconds.

  4. Cooling down a pressed white Subli Block number on a jersey

    4. Cooling Down

    Let it cool for a few seconds until it is warm, not hot.

  5. Warm peeling the liner from a white Subli Block number 23

    5. Peel

    Peel the release liner while it is still warm.

  6. Finished white Subli Block heat transfer vinyl number 23 on a red sublimated jersey

    6. Done

    Your Subli Block transfer is finished and ready to wear. Wait 24 hours before the first wash.

Dye-block barrier: Creates the ultimate barrier to dye migration, so your design stays crisp and clean on sublimated garments.
Lightweight and stretchy: Lightweight with good elasticity.
Ideal for: Names, numbers and sponsor logos.
Easy to weed: Excess film comes away easily from your design.
Material specs: PU film with an adhesive carrier.
Fabric compatibility: 100% cotton, 100% polyester, poly/cotton blends, acrylic and similar fabrics. Not suitable for nylon or coated fabrics.

Press: Medium, even pressure at 150°C (302°F) for 10 seconds.
Peel: WARM PEEL. Remove the release liner while it is still warm.
Test first: We highly recommend performing a test before proceeding with standard production.
Curing: Allow at least 24 hours after pressing before the first wash.

Standard machine wash at 60°C.
Tumble dry on a low setting.
Iron inside-out only.
Do not bleach. Use household standard washing detergent.

Thickness: 170μm (± 20μm).
Storage: Below 25°C (± 3°C) at 40% relative humidity (± 20%), out of direct sunlight.
Shelf Life: 1 year.

Design Library

1 18